PG-82_28

Description	Unit	Value	Test Method
Average 7-day Max. Pavement Design Temp	°C	<82	ASTM D6373
Minimum Pavement Design Temperature	°C	>-28	ASTM D6373
ORIGINAL BINDER
Flash Point Temp, T48: Minimum	°C	230	ASTM D92
Viscosity Max. Test Temperature	°C	135	ASTM D4402
Dynamic Shear, TP5:Min 1.00 kPa test temp@10rad/s	°C	70	ASTM D6373
ROLLING THIN FILM OVEN (T240)
Mass Loss, Maximum, Percent	%	1.00	ASTM D6
Dynamic Shear, TP5:Min 2.20 kPa test temp@10rad/s	°C	82	ASTM D6373
PRESSURE AGING VESSEL RESIDUE (PPI)
PAV Aging Temperature	–	100/110	–
Dynamic Shear, TP5:Max 5000 kPa test temp@10rad/s	°C	31	–
PHYSICAL HARDENING		REPORT
Creep Stiffness, TP1:S, Max 300.0MPa, Min0.300 test temp@60s	°C	-18	ASTM D6648
Direct Tension, TP3: Failure Strain, Min 1.0% test temp@1.0mm/min	°C	-18		ASTM D6723