Oxidized
Bitumen 105/15
Petra Oil’s Oxidized Bitumen 105/15 is a durable, rigid oxidized bitumen designed for heavy-duty industrial and construction use. With a softening point of 105°C and a low penetration value of 15 dmm, this grade provides enhanced stiffness and high-temperature resistance, ideal for applications requiring minimal deformation under stress and long-term exposure to heat.
Bitumen 105/15 is especially suitable for environments that experience prolonged thermal load or where a solid, non-deforming waterproofing or sealing layer is required. It is commonly used in roofing sheets, joint sealing compounds, anti-vibration pads, and chemical-resistant coatings.
Produced through an air-blowing process under strict quality control, this grade meets international ASTM D36 and D5 standards and delivers stable, repeatable results in the field.
Key Specifications:
- Grade: Oxidized Bitumen 105/15
- Softening Point: ~105°C
- Penetration: ~15 dmm at 25°C
- Standard Compliance: ASTM D36 / ASTM D5
- Form: Solid at room temperature
Main Applications:
- Roofing and Industrial Sheeting: Used in membrane production for waterproof and UV-resistant roofs.
- Sealing and Insulation in HVAC and Pipeline Systems: Provides heat and moisture barriers.
- Vibration Dampening in Machinery Foundations: Reduces mechanical stress and enhances equipment life.
- Bituminous Paints and Protective Coatings: Offers chemical resistance and long-term surface protection.
Key Benefits:
- High Thermal Resistance: Performs consistently in high-heat applications without softening.
- Low Penetration, High Rigidity: Suitable for load-bearing and stress-resilient sealing.
- Long-Term Structural Integrity: Reduces degradation and material fatigue over time.
- Versatile and Easy to Process: Can be melted and applied with standard heating tools and methods.
Specification
No |
Description |
Unit |
150/5 Grade |
Test Method |
---|---|---|---|---|
1
|
Specific Gravity @ 25°C
|
Kg/Cm3
|
1.05 aprx
|
ASTM D70
EN 15326
|
2
|
Penetration @ 25°C
|
MM/10
|
1/10
|
ASTM D5
EN 1426
|
3
|
Softening Point °C
|
°C
|
145/155
|
ASTM D36
EN 1427
|
4
|
Loss on Heating (wt) %
|
WT %
|
0.2 Max
|
ASTM D6
EN 13303
|
5
|
Flash Point °C
|
°C
|
250 Min
|
ASTM D92
EN ISO 2592
|
6
|
Solubility is CS2 (wt) %
|
WT %
|
99.5 Min
|
ASTM D4
EN 12592
|
7
|
Spot Test
|
@
|
Negative
|
AASHOT 102
|