PG76_34

Description Unit Value Test Method
Average 7-day Max. Pavement Design Temp °C <76 ASTM D6373
Minimum Pavement Design Temperature °C >-34 ASTM D6373
ORIGINAL BINDER
Flash Point Temp, T48: Minimum °C 230 ASTM D92
Viscosity Max. Test Temperature °C 135 ASTM D4402
Dynamic Shear, TP5:Min 1.00 kPa test temp@10rad/s °C 76 ASTM D6373
ROLLING THIN FILM OVEN (T240)
Mass Loss, Maximum, Percent % 1.00 ASTM D6
Dynamic Shear, TP5:Min 2.20 kPa test temp@10rad/s °C 76 ASTM D6373
PRESSURE AGING VESSEL RESIDUE (PPI)
PAV Aging Temperature - 100/110 -
Dynamic Shear, TP5:Max 5000 kPa test temp@10rad/s °C 25 -
PHYSICAL HARDENING REPORT
Creep Stiffness, TP1:S, Max 300.0MPa, Min0.300 test temp@60s °C -24 ASTM D6648
Direct Tension, TP3: Failure Strain, Min 1.0% test temp@1.0mm/min °C -24 ASTM D6723
TOP
Get Quotation
Open chat